High Temperature Resistance ISO9001 Certificate Silicon Mullite Refractory Bricks
Introduction:
Silica-mullite bricks are made with raw material high grade bauxite and SiC and special sintering process. Silica-mullite bricks are characterized by high density, good performance of abrasion resistance and thermal shock resistance. It can constantly form protective layer for reducing accrection formation, long application cycle,etc.
Application:
Transitional zone,
Kiln Mouth,
Tertiary Air duct,
Decomposing furnace of cement kiln.
Technical Index:
| Item |
Silicon Mullite Bricks |
| GM1560 |
GM1600 |
GM1550 |
| Chemical Component |
Al2O3/% ≥ |
65 |
63 |
60 |
| Physical Properties |
Bulk Density g/cm3 ≥ |
2.62 |
2.60 |
2.55 |
| Apparent Porosity % ≤ |
17 |
17 |
19 |
| Crushing Strength MPa ≥ |
85 |
90 |
90 |
| Refractoriness Under Load T0.6/℃ ≥ |
1650 |
1600 |
1550 |
|
Thermal Shock Resistance
(1100℃～water cooling) times ≥
|
10 |
10 |
12 |
| Cold Crushing Strength cm3 |
5 |
| * Thermal Expansion Rate/% |
Offer actual measurement data |
|
Above parameters is guarantee value. Specification can be customized as actual working condition.
|
FAQ:
1. When Jansincere Company established?
In 1986.
2. How many staffs in your factory?
About 500, including including 23 managers, 42 technicians, and 8 qualified installation engineers.
3. What’s your main products scope?
Our main products are dense refractory bricks and monolithic refractories, including alumino-silicate refractories, magnetite-alumina refractory, special high grade refractories, refractory cement, castable refractory and so on.
Refractory Fire Bricks Size or Shapes:
The shape can be customized according to the brick drawings.
Brick Size
(mm) |
| Straight Shape |
Side Arch |
|
230*114*65
250*123*65
171*113*65
230*114*20
230*114*30
230*114*40
230*57*65
520*230*113
650*230*113
780*230*113
452*230*65
230*150*75
345*150*75
|
230*65/55*114
230*65/45*114
230*65/55*171
230*65/45*171
230*114*65/55
230*114*65/45
230*150/120*75
230*150/110*75 |
