Good Thermal Shock Resistance Zircon Brick, High Density Refractory Material
Introduction
Zircon brick is produced by mixing, molding, drying and sintering at high temperature in shuttle kiln.
Features of zircon brick:
1. Dense crystal structure.
2. High mechanical strength at normal and high temperature.
3. Low creep and low permanent liner change rate.
Index
| Item |
Dense Zircon Brick |
Zircon Brick |
| GK65 |
GK60 |
| ZrO2 % |
≥65 |
≥60 |
| SiO % |
— |
≤38 |
| Fe2O3 % |
≤0.3 |
≤0.5 |
| Apparent Porosity % |
≤18 |
≤22 |
| Bulk Density g/cm3 |
≥3.7 |
≥3.5 |
| Cold Crushing Strength Mpa |
≥100 |
≥100 |
| Refractoriness Under Load( 0.2MPa,0.6%) ℃ |
≥1650 |
≥1620 |
FAQ:
The main business scope and products are:
No.1 branch specialized in manufacturing various lightweight insulating refractories.
No.2 branch specialized in manufacturing various aluminum silicon series of refractories.
No.3 branch specialized in manufacturing high-grade aluminum silicon carbide brick, corundum bricks, silica brick.
No.4 branch specialized in manufacturing high-grade magnesium series of refractories.
No.5 branch specialized in manufacturing aluminum silicon series of mortar,castable,pre-cast products and other monolithic products.
Package of Zircon Brick:
1: 15-21 crates/ pallets can be loaded in one 20' container
2: Crate or pallet size: length isless than 1.3m, width is between 0.6 and 1.1m
3: Gross weight of each crate or pallet shall be around 1 metric ton and shall not exceed 1.8 metric ton
4: Special requirement of packing details are acceptable
5: A packing list will be issued for approval after designing.
